Tiliqua Flasher

Browser

• Only Chrome is supported by WebUSB. Edge may work, but is slow.

OS / Setup

• macOS: No setup needed.
• Windows: Use Zadig to install a WinUSB driver for the device:
  1. Plug in Tiliqua
  2. Run Zadig
  3. In the menu, under 'Options', choose 'List All Devices'
  4. In the main drop down, select the Tiliqua 'apfbug' device
  5. Select 'WinUSB' in the drop down near the green arrow
  6. Click 'Install Driver', wait for it to complete.
  7. Refresh this page, flashing should work.
• Linux: You may need to add a udev rule so Tiliqua can be accessed without sudo.

Usage

1. Wait for 'Ready' to be shown: it takes a few seconds for the dependencies to be downloaded.
2. Connect Tiliqua: Connect 'dbg' (top) USB port to your computer. Click 'Connect to Tiliqua' button, select your device.
3. Flash Tiliqua:
   • Pick a bitstream with Select from Server or Upload File
   • Select a Slot (0-7) to flash it in (or 'bootloader' if you are updating the bootloader bitstream)
   • Click Flash and wait until flashing is complete. Tiliqua will automatically restart.
   • Alternatively, you can use Factory Reflash, which will wipe and reflash all slots with default bitstreams in their default positions from the latest Tiliqua gateware release.

Preview Bitstreams

Some unreleased bitstreams are available for testing. For documentation on these, see: vsynth, xbeam-ex.